KISSlicer 1.6.3 profile for the CraftBot 3 dual

Hi, as asked in another post, here an start profile for KISSlicer and the CraftBot 3.
I used it a lot for a single extruder / petg, that's tweaked.
And earlier I made a profile to use PETG or PLA to print the model and SBS as support structure.
KISSlicer offers a lot of tweaks for extruder change, and that worked earlier, but I have to check if all commands still are ok with the latest firmware.
You can download it here, together with the Win64 exe. Mac and Linux available at the KISSlicer site.
You need a pro key of 42 dollar to use the dual and fancy settings.
Bart

April 6, 2019

Bart ter Haar Bart ter Haar
Service partner
1646 posts

0 replies

To start a discussion or reply to a post please Login or Create an account.